INFUSION FLUID WARMER
Infusion fluid warmer is an indirect heating device (dry heat warmer) and can be used repeatedly with standard IV infusion tubing set. The transfused fluid is heated up while passing through the infusion tube which is placed in!RS!-shaped channel on the heating plate of the warmer. ET-TF-II is reliable and easy to use in various clinic sites.
BENEFITS 1.Portable and easy to use.2.No special training is required3.Setup can be finished in 1 minute at most.4.High accurate digital control for temperature.5.Infusion fluid is regulatrd automatically to the set temperature in short time. 6.Acoustic and visible alarming mechanism prevents from over-temperature automatic power cutout protect patient from overheat of fluid.7.Saving your cost because no special disposable sets are needed. ET-TF-II is just used with standard I.V tubing
- Routine transfusion.
- Low flow rate infusion in ICU.
- Transfusion exchange
- high calorie infusion
- Model : ET-TF-II
- Tube size : 3.0-4.0mm
- Flow rate : 2~12ml/min (against temperature span : 25-41)
- Power : 110vA 11v (AC) or 220vA 23v (AC) Max. 70w 50A 2%Hz
- Classification : class 1/ type B
- Operation conditions
- 5<<40 ; Relative humidity : 80%
- Packing Dimension : 36.5*15.5*12.5cm
- Weight : 600g